Semi-Auto Rifle Scope Mounts

Showing 7–12 of 26 results

  • Details

    Aimtech Mount Systems – Rifle Mount

    $17.00
    Can be user installed in three minutes. No gunsmithing and no sight removal required. Iron sights remain functional. Extruded and machined high strength aluminum alloy. Mounts scopes, electronic sights and lasers using Weaver-style bases. Weighs only four ounces. Installation tool and instructions included
  • Details

    Aimtech Mount Systems – Ruger Mini-14 Scout w/Rail Rifle Mount Stainless

    $72.00
    Can be user installed in three minutes. No gunsmithing and no sight removal required. Iron sights remain functional. Extruded and machined high strength aluminum alloy. Mounts scopes, electronic sights and lasers using Weaver-style bases. Weighs only four ounces. Installation tool and instructions included.
  • Details

    Aimtech Mount Systems – Ruger Mini-14 Scout w/Rail Rifle Mount

    $65.00
    Can be user installed in three minutes. No gunsmithing and no sight removal required. Iron sights remain functional. Extruded and machined high strength aluminum alloy. Mounts scopes, electronic sights and lasers using Weaver-style bases. Weighs only four ounces. Installation tool and instructions included.
  • Details

    GG&G – Accucam Quick Detach Standard Base Scout Mil-Std 1913

    $149.95
    The Accucam Scout Length Mounting Base was designed to mount easily onto the integral rail of the AR15/M16 flat top receiver and interface with our MAD or both of our A2 Style BUIS flip-up rear sights. Manufactured to MIL-SPEC-1913, the Accucam Scout Length Mounting Base raises the line of sight by 1/2-inch, offering a proper cheek weld when optical devices are attached. The quick detachable scope mount rail extends two inches beyond the end of the receiver and clears the M4 forearm. It was developed to accommodate "scout" type scopes, long body scope tubes, and night vision compatible red dot sights with night vision monoculars mounted to their rear. Once the optic is mounted, the integrated Accucam Quick Detach Lever System provides the shooter with the ability to quickly remove the scope in order to utilize other optics as the mission may require, and have the confidence of 1/2 MOA repeatability upon re-installation. As with all GG&G products, the QD Scout Rail is designed and manufactured to meet the rigors of combat and professional use. The Accucam Scout Length Mounting Base is manufactured from solid billet 6061 T6 aluminum alloy and has a Type III hard coat anodized matte black mil-spec finish. All edges have been dehorned to protect the operator. The base can be quickly installed on a dovetail rail in seconds by rotating the Accucam Cam Lever to the locked position. It can then be quickly removed by rotating the Accucam Cam Lever to the unlocked position. Unlike many quick detachable scope mounts, it is fully adjustable to fit Weaver and MIL-STD 1913 dovetails. The patent pending design allows you to adjust the tension to accommodate out of spec or worn dovetails. It is not recommended for .50 BMG or lightweight machine guns. In tests, the Accucam Locking Lever System has shown to be repeatable to 1/2 MOA. The unique finger loop lever is easily operated, even with a gloved hand, and the rounded design is ergonomic and virtually snag proof. The Accucam mechanism is manufactured from solid billet 4140 steel and manganese phosphated matte black per mil-spec
  • Details

    GG&G – Cantilever Aimpoint Ring

    $167.00

    GG&G has designed a new Aimpoint Cantilever Mount in order to provide redundancy in combat situations. If you attach an Aimpoint Comp M series red dot sight directly to an M16/AR15 "flat-top" upper receiver's integral rail using a conventional ring mount, it will be far too low to acquire the red dot without front sight interference, no matter what type of cheek weld you adopt. Our Aimpoint Cantilever Mount Ring permits mounting the Aimpoint Comp M series scopes directly to the receiver's integral rail with the red dot positioned above the front sight post. Yet it's still low enough so that our MAD or A2-Style Flip Up Rear Sights can be deployed to co-witness directly through the Aimpoint's optics should its battery fail. The GG&G Cantilever Ring is also designed to place the Aimpoint Comp M series scopes far enough forward so that a night vision monocular can be mounted to the rear in co-alignment and in conjunction with the Aimpoint's night vision compatibility.

    The newly re-designed GG&G Aimpoint Cantilever Scope Mount Ring is lighter in weight, and incorporates a captivated thumbnut and spring activated sidebar, which aides in installing the mount, especially in low light conditions. The ring body still has a built-in insulated spare battery compartment with a spare battery cap, located on the side for easy access. The rugged GG&G Cantilever Ring is manufactured from solid billet 6061 T6 aluminum and is Type III hard-coat anodized black to mil-spec.

  • Details

    GG&G – Scout Rail, 7 Inch

    $76.00

    GG&G optical mounting rails were designed to mount easily over the integral rails of the AR15/M16 flat top receiver and work in conjunction with any of GG&G back up iron sights. As these rail mounting brackets raise the line of sight by 1/2 inch, they offer a proper cheek weld when optical devices are attached. In addition, they serve to protect the flat top receiver's integral rails from the damaging wear associated with lever type quick-release mounts, especially those without buffer pads.
     
    The GG&G Scout rail extends two inches beyond the hand guards and clears the M4 forearm. It was developed to accommodate long-eye-relief "scout"-type scopes and also Aimpoint red dot sights with night vision monoculars mounted to their rear.

    Each scope mount rail is manufactured from billet 6061 T6 aluminum alloy, black Type III hard-coat anodized per Mil-Spec, and meet MIL-STD-1913. These rail mounting systems lock onto the flat top receiver by means of a full locking side bar and two round head socket head screws. This provides both a positive and perfectly aligned lock-up even on well-worn receiver rails. The socket head wrench required for installation is included.