Features a M700 Stainless Steel barreled action with a 24 inch R5 Mil-Spec barrel, the same type rifling used in the M-24 sniper rifles. Varmint barrel with 11.25 inch twist rate with five lands and grooves and eleven degree target crown. Stock has aluminum bedding in block in standard VS configuration. NOW with Remingtons X-MARK PRO TRIGGER!
The illustration to the right is an example of a target fired from a customers unmodified rifle. He used Sierra 175 MK bullets, Lake City Brass (also used Fed GM brass), Match primers and Varget powder (a full grain under max). The bullets were seating to standard magazine length at approximately 2.855 inches over all length. Case prep was nominal. Uniform primer pockets and trim to length. As illustrated, the rifle can turn out amazing accuracy with very little effort handloading. Factory match ammo has shown groups in the .3 to .6 range depending on ammo. Results may vary but this target illustrated a typical group with this individual rifle and this one handload. Take note that the cold bore shot is the highest in the group and is north of center by an amazing 1/8 inch!
